Menu

Manufacturing: Revenue Intelligence to Cash

Last reviewed: 16 November 2026

On this page
  1. The problem
  2. The solutions
  3. Why GGA
  4. What GGA would do
  5. What we need from you
  6. How you stay in control
  7. Questions

Direct answer. Manufacturers in India are usually paid late because an invoice fails the buyer's three-way match, misses a payment run, or sits with a dealer holding dues against claims. Inability to pay is the exception. Split the book by buyer type, clear the blocker on each invoice, and escalate only what is left. GGA owns that work from submission to cash.

GGA India at a glance

  • GGA India Private Limited is a B2B revenue-realization firm, operating since 2002, headquartered in Gurugram.
  • 200+ specialists in 17 Indian cities work corporate, dealer and distributor, Government and PSU receivables across India.
  • Success commission is based on cash actually received. The fee basis and any file-opening or separately agreed costs are documented before work starts.
  • Your customers pay you directly. GGA never receives or holds your money.
  • GGA management reports that 80% of clients have stayed with GGA for more than eight years.

The problem: one ledger, three payment clocks

A manufacturing ledger usually holds three payment behaviours — corporate buyers, dealers, and institutional or project customers — managed as if they were one. Each pays on a different event, and a reminder moves none of them.

Exhibit 1: How a manufacturer actually gets paid in India, and where each route breaks (GGA operating observation)

Buyer type How payment works Where it breaks Test: if you see this, it is the cause
Corporate and OEM buyers Goods arrive at the plant gate; stores posts a GRN; quality clears the lot; accounts payable matches invoice, PO and GRN (the three-way match); the matched invoice joins the next scheduled payment run GRN short or never posted; rate or quantity differs from the PO; PO line closed or exhausted; invoice raised on the wrong GSTIN or plant; lot on quality hold The invoice is not in the buyer's open payables, or shows "blocked"
Dealers and distributors Credit limit, schemes and sell-through; the dealer pays when stock moves and claims are settled Scheme, rate-difference, damage or return claims unsettled; the dealer has stopped buying; security cheques stale The dealer quotes a claim, or has placed no order in months
Institutional, PSU and project customers Inspection, certified progress, bill passing; retention and deposits held to the end Inspection report or completion certificate missing; liquidated damages deducted; retention outlives the project team The running bills are paid; the close-out money is not

The payment run is the hidden clock. Large buyers release payments on fixed run days. An invoice that clears the match a day after the run waits for the next one, and an invoice still blocked when the run closes waits indefinitely. Your ageing report shows "overdue"; the buyer's system shows "not payable yet." Both are right, and nobody on your side owns the gap. That is why some buyers always pay late (invoices stuck in approval).

GST now sits inside the match. A buyer can take input tax credit only on an invoice that appears in its GSTR-2B, under section 16(2)(aa) of the CGST Act. A wrong GSTIN or a late GSTR-1 on your side puts the invoice on hold on theirs. The same section works for you: a buyer that has not paid the value and tax within 180 days of the invoice date must reverse the credit it claimed.

Four accounting habits hide the real position: scheme and rebate accruals carried as receivables though they are owed to dealers; depot, consignment and stock-transfer balances read as debtors; quality and freight deductions left unreconciled for quarters (short payments and debit notes); and one blended DSO that hides a single channel going bad (reducing DSO).

A blocked invoice also gets older. GGA's benchmark by invoice age is descriptive, not a forecast: over 95% of value comes in up to three months from invoice date, about 10% beyond three years. Meanwhile ₹25 crore overdue at a 12% cost of borrowing costs ₹3 crore a year.

The pattern behind it. A plant's revenue is sold but not collected when sales, dispatch, billing and finance each hold a piece of the invoice and the buyer's stores, quality, payables and treasury each hold a step. GGA puts one Invoice Lifecycle Owner on each invoice from submission to cash — set out for corporate customers, for the trade channel and for Government and PSU buyers.

The solutions: eight ways manufacturers handle late payment

Each option fixes one clock; none fixes all three unless someone owns the invoice end to end.

Exhibit 2: Options for a manufacturer's overdue book, compared honestly

# Option What it fixes What it leaves to you Better choice when
1 Your accounts receivable team Statements, reminders, receipt matching The buyer's plant, stores and quality steps; field visits to dealers Few large buyers on clean terms
2 Your sales team and area managers Access to the buyer's purchase head; dealer relationships Time taken from the next order; old dues of dealers who no longer buy Current invoices with an active buyer
3 AR software or a receivables BPO Dunning, cash application, dashboards at scale Why an invoice is blocked inside the buyer; field work High-volume, low-value invoices already matched
4 Conventional collection agency Calls on agreed balances Claims, GRNs, quality holds — it cannot settle any of them A small, undisputed balance with a buyer who has gone quiet
5 Law firm and legal notice A demand on record; a suit, an MSME reference or IBC where the facts support it A notice over a missing GRN creates the dispute it was meant to end (legal notice) Documents complete, balance agreed, buyer still refuses
6 Domestic trade credit insurance Pays a covered loss on insolvency or protracted default Collection itself; claims depend on policy conditions and timely reporting Concentrated exposure to a few buyers
7 Factoring, invoice discounting or TReDS Cash today against accepted invoices The blocked or disputed invoice, which no financier will take Accepted invoices on long but reliable terms
8 GGA as Invoice Lifecycle Owner One owner per invoice across buyer, dealer and project clocks; reconcile, then collect; field presence in 17 cities Every settlement, discount or legal decision, which stays with you A mixed book, many hands, ageing past 90 days

Micro and small manufacturers have extra leverage. Under the MSMED Act, a buyer pays a Udyam-registered micro or small supplier within the agreed period, at most 45 days from acceptance, or owes compound interest at three times the RBI bank rate. Its tax deduction waits until it pays (section 37(2)(g), Income-tax Act 2025), and companies disclose such dues beyond 45 days in a half-yearly MSME Form-1. Companies above ₹250 crore turnover and all CPSEs were directed onto TReDS by 31 March 2025; since 15 October 2026, under the new section 15A of the MSMED Act, CPSEs must also settle their MSME invoices through it. New cases go to the MSME ODR portal.

What you can do this week

  1. Split your ageing into three tabs: corporate buyers, dealers, institutional and project. Note each tab's share of value over 90 days.
  2. For your ten largest corporate overdues, ask each buyer one question: is the invoice in your open payables, and is it blocked? Write down the answer and the person who gave it.
  3. Reconcile GST. Check that each blocked invoice sits on the right GSTIN and appears in the buyer's GSTR-2B.
  4. Strip scheme accruals and depot stock out of debtors so the overdue figure is real.
  5. List dealers with no order in 90 days and the claim each one quotes.

Why GGA: the money nobody owns, across all three clocks

We don't touch the money your sales team sells. We collect the money nobody owns. In manufacturing that means invoices blocked at a buyer's plant, dealers who have stopped buying, service, spares and AMC invoices with no salesperson attached (small service invoices), and project close-outs.

  • Segment first. GGA separates the book by buyer type before judging it, and scores the dealer base as a portfolio — A and B dealers stay with sales; C and D are the work.
  • Work inside the buyer's process. From invoice submission, GGA tracks each invoice through the buyer's receipt, quality, match and payment-run steps, so it is payable before the run closes (Revenue Assurance).
  • Reconcile, then collect. Deductions, scheme claims and freight differences are netted to a figure both sides sign (dealer scheme claims).
  • Intelligence before credit. Dealer and customer intelligence test new and concentrated exposure before the next dispatch.

Evidence from manufacturing and industrial books. At a heavy-industry client, the share of the book more than 60 days past due fell from 25% to under 5%. At a, invoices paid by the due date rose from 35% to 85% and DSO fell 29%. For an equipment-maintenance business, GGA collected ₹162.52 crore across 14,803 receipts. On one dealer book GGA scored, 78% of value sat with dealers neither buying nor paying.

What GGA would do

Three ledgers, worked in parallel: the first payments arrive in month one, and by month six the objective is each overdue rupee in scope either collected or classified as at risk or not collectable, with its reason.

  1. Weeks 1–2: split the book by buyer type and age; validate the document set — entity, PO, GSTIN, delivery proof. You receive: three ledgers with each one's over-90-day value and its top blockers.
  2. Month 1: corporate buyers. Every overdue invoice located in the buyer's system and its releasing officer named. You receive: an open-items register with stage, owner and committed date.
  3. Months 1–3: dealers. C and D dealers contacted by telephone and in the field; claims tested against circulars. You receive: signed balance confirmations and payment plans for your approval.
  4. Months 2–3: institutional and project money. Missing inspection reports, completion certificates and retention releases requested from the right office. You receive: a close-out file per contract.
  5. Months 4–5: escalation. For buyers whose dates keep slipping, GGA lays out the legal or MSME route, the documents ready and the limitation date. You receive: an escalation note for your written decision.
  6. By month 6: collected or classified. You receive: a closing position per account and the process fixes your credit policy should carry.

Success commission is based on cash actually received. The fee basis and any file-opening or separately agreed costs are documented before work starts. The first step is a complimentary Receivables Position Review.

What we need from you

A buyer-wise ageing and a dealer master are enough for a first view.

To start

  • Customer-wise and invoice-wise ageing at the latest month-end, marked corporate, dealer or institutional
  • Dealer master with last order and last receipt dates
  • Known deductions, debit notes and open scheme claims
  • Your Udyam certificate, if you are a micro or small enterprise

To act

  • Invoices with PO, e-way bill or LR, and GRN or inspection report
  • Buyer ledgers or signed balance confirmations
  • Scheme circulars and the claims dealers filed against them
  • Security cheque register for dealers
  • Contracts, completion certificates and the register of retention, deposits and bank guarantees
  • Buyer contacts: stores, quality, purchase and accounts payable

Missing some of these? Send what you have — telling you what is missing is part of the first reply.

How you stay in control

Your buyers and dealers pay you; every material step waits for your written word.

  • Your customer pays you directly. GGA never receives or holds your money.
  • Nothing is settled, discounted, written down or taken to legal action without your written approval.
  • GGA manages the communication with your customers; escalation steps are discussed with you.
  • One named GGA owner per account; monthly report to your CEO and CFO, a fortnightly review call, and an immediate flash report when a risk appears.
  • Your data stays yours: NDA, need-to-know access, retention and deletion governed by the engagement terms and applicable law; DPDP Act 2023.
  • Fees agreed in writing before work starts; six-month term, reviewed with you monthly.
  • A-class dealers and live key accounts stay with your sales team unless you add them to scope.

Send us one unpaid invoice. Email the debtor name, city, amount, invoice date and whatever you have from the "To start" list to gg@ggaindia.co.in. Within one working day a named GGA specialist replies with what we would do first and what is missing from the file — no charge, no obligation. For a whole book, ask for a complimentary Receivables Position Review.

A different situation? Foreign company owed money by an Indian business → India Desk · Indian exporter owed by an overseas buyer → Global Receivables Desk

Frequently asked questions

Why does a large customer pay other suppliers but not us?

Usually your invoice is not yet payable in its system: a GRN, rate or GSTIN mismatch blocked it, or it missed the run. Ask whether it sits in open payables before you escalate.

Should one credit policy cover dealers and corporate buyers?

No. Dealers pay from sell-through and claims; corporate buyers pay on match and run days; project customers pay on certificates. Set limits, terms and follow-up rhythm separately for each.

Does the MSME 45-day rule help a manufacturer?

Only a Udyam-registered micro or small enterprise, and not a trader. The buyer then owes interest beyond the agreed period, capped at 45 days, and its tax deduction waits until it pays.

Is factoring or TReDS an alternative to collection?

For accepted invoices, yes: it brings cash forward. A financier will not take an invoice blocked on a GRN or under dispute, and those are most of a manufacturer's overdue.

What if a buyer is genuinely in trouble?

GGA flags it to you immediately with the evidence, and the account is classified as at risk. Legal or insolvency routes are your decision (customer in insolvency).

Sources

This page summarises the position as at 9 November 2026. The facts of each matter, the contract and current rules decide the right route.

Email GGA gg@ggaindia.co.in